🗺️ Chapter map
Follow the same broad order as the textbook. Open each section, try the interactions, then complete the practice and quiz.
Force, displacement, joule, zero/positive/negative work, force–displacement graph.
Work changes energy; examples of energy transfer and collisions.
Mechanical, thermal, light, sound, electrical, nuclear and chemical energy.
Kinetic energy, potential energy, conservation and energy transformations.
Rate of doing work, watt and horsepower.
Mechanical advantage, pulley, inclined plane, lever classes and combinations.
7.1 🧰 Work done by a constant force
In science, work is done when a force causes displacement in the direction of that force. The textbook illustrates this by lifting a 5 kg wheat bag: lifting more bags or lifting the same bag to a greater height requires more work.
Measured in newtons (N).
Distance moved in the direction of the force, measured in metres (m).
Measured in joules (J). 1 J = 1 N m = 1 kg m² s⁻².
Try the work calculator
When is work zero?
If F = 0, work is zero.
If s = 0, work is zero—even if you push hard against a rigid wall.
If force is perpendicular to displacement, it does no work on the object. Example: the upward force on a box carried horizontally.
Positive and negative work
➜ Positive work
Force and displacement point in the same direction. Example: pushing a wheelchair forward; the applied force while lifting a dumbbell.
← Negative work
Force acts opposite to displacement. Example: goalkeeper stopping a moving ball; force applied while slowly lowering a dumbbell.
Worked example 7.2: goalkeeper stopping a ball
A goalkeeper applies 200 N opposite to the ball’s displacement of 15 cm.
Convert 15 cm = 0.15 m. Because force and displacement are opposite, use negative displacement.
The work done by the goalkeeper on the ball is −30 J.
Force–displacement graph: area means work
For a constant force, the area under a force–displacement graph gives work. The textbook example has 10 N acting over 1 m, so the rectangular area is 10 N × 1 m = 10 J. If force varies, find the area under the graph between the starting and ending positions.
- Is work done on a barbell while it is held steady?
- Is friction’s work on coins sliding over a rough surface positive, negative or zero?
1. No work is done on the barbell if it has no displacement. 2. Negative work, because friction opposes the sliding motion.
7.2 🔄 The work–energy theorem
An object can gain the capacity to do work. A thrown cricket ball can knock over wickets; a raised flowerpot can do work if it falls. Work done on an object appears as a change in its energy.
Textbook equation 7.3. The SI unit of energy is the joule (J), the same as work.
Energy can also be transferred without mechanical work
Energy flows from a hotter object to a colder one in contact.
The Sun’s energy reaches Earth without direct contact.
Energy can also be transferred in electric circuits, sound waves and nuclear reactions.
Worked example 7.3: a carrom shot
The moving striker collides with the white coin. The striker does positive work on the white coin, increasing its energy; the white coin does negative work on the striker, decreasing the striker’s energy. The white coin then does positive work on the black coin, while the black coin does negative work on the white coin.
When you pedal a bicycle on a flat road, what forms does muscular energy appear as?
It appears as mechanical energy of motion and also as thermal energy and sound due to the body, tyres, chain and friction.
7.3 🌈 Forms of energy
Energy is the capacity to do work. It can exist in several forms and can change from one form to another.
🏃 Mechanical
Energy due to motion or position of objects.
🔥 Thermal
Energy that makes things warm or hot.
💡 Light
Energy that allows us to see.
🔊 Sound
Energy associated with vibrations of air or other molecules.
⚡ Electrical
Energy related to the position or motion of electric charges.
☢️ Nuclear
Energy stored in the nuclei of atoms.
🍎 Chemical
Energy stored in fuels and food in chemical bonds.
Tap to check energy transformations
Electrical → light + thermal
Electrical → thermal
Chemical → mechanical (and thermal)
Mechanical → sound
7.4 ⚙️ Mechanical energy
Mechanical energy is the energy an object possesses because of its motion or position. It includes kinetic and potential energy.
7.4.1 Kinetic energy (K)
Kinetic energy is energy due to motion. A moving bicycle, rolling ball or moving vehicle has kinetic energy. An object at rest has zero kinetic energy in this treatment.
m = mass in kg; v = speed in m/s; K is in joules. Kinetic energy increases with mass and with the square of speed.
Kinetic energy calculator
K becomes 4 times as large.
K becomes 9 times as large.
K doubles if speed stays the same.
Worked example 7.5: cricket ball
Mass = 0.2 kg; speed = 154.8 km/h = 43 m/s.
Worked example 7.6: jet aircraft stopping
Mass = 15,000 kg; stopping force = 367,500 N; stopping distance = 100 m. The wire’s force is opposite the motion, so work is negative. Work done by wire = −367,500 × 100 = −36,750,000 J. By the work–energy theorem, this equals the change from initial kinetic energy to zero. Solving ½mv² = 36,750,000 J gives v = 70 m/s = 252 km/h.
- Objects A and B have masses m and 4m and the same kinetic energy. What is the ratio of their speeds?
- Does kinetic energy change with position if speed stays constant?
1. Since ½mv² is equal, vA:vB = 2:1. 2. No; kinetic energy depends on mass and speed, not position by itself.
7.4.2 Potential energy (U)
Potential energy is stored energy due to an object’s position or configuration. A stretched rubber band, bent bow, compressed spring, or separated interacting objects can store energy because work was done to change their configuration.
m = mass (kg), g = acceleration due to gravity (m/s²), h = height (m) relative to a chosen reference level. Unit: joule (J).
Potential energy calculator
Worked example 7.7: a ball thrown upwards
For a 0.5 kg ball thrown vertically upwards at 10 m/s, take g = 10 m/s² and neglect air resistance. Initial kinetic energy = ½ × 0.5 × 10² = 25 J. At the highest point, speed is zero, so kinetic energy is zero and the gain in gravitational potential energy is 25 J. From mgh = 25 J, h = 5 m.
Elastic potential energy: energy stored in a deformed object such as a stretched band or compressed spring. Gravitational potential energy: energy associated with height in Earth’s gravitational field. The textbook also discusses potential energy from arrangements of interacting objects, such as separated magnets.
7.4.3 Conservation of mechanical energy
When friction and other energy losses are ignored, the total mechanical energy remains constant as kinetic and potential energy change into each other.
Explore a falling object
Move the slider from top to bottom. This simple model assumes no air resistance and uses a total mechanical energy of 100 J.
50 J
50 J
Total = 100 J
Worked example 7.8: child sliding down a slide
If a child starts from rest at height h and friction is neglected, initial energy is mgh. At the bottom, potential energy relative to the bottom is zero and kinetic energy is ½mv². Equating them gives mgh = ½mv², so v = √(2gh). The mass cancels, so the ideal speed depends on the vertical height and g, not on the child’s mass.
Worked example 7.9: escape ramp
A 10,000 kg truck moves at 72 km/h = 20 m/s and climbs a 30° sand ramp. Initial kinetic energy = ½ × 10,000 × 20² = 2,000,000 J. For every 2 m along the ramp, the truck rises 1 m, so height = d/2. With gravity 10 m/s², the gain in potential energy is 10,000 × 10 × d/2 = 50,000d J. The sand’s resistive work is also negative; the textbook energy balance gives d = 20 m as the minimum ramp length under the stated assumptions.
- Show that just before a falling ball hits the ground, its mechanical energy is mgh in the ideal case.
- On a roller coaster, how do K and U change at high and low points? Why may later peaks be lower?
1. Ignoring air resistance, the lost potential energy becomes kinetic energy, so total mechanical energy remains mgh. 2. At high points U is high and K low; at low points K is high and U low. Friction and air resistance transfer some mechanical energy to thermal energy and sound.
7.5 🚀 Power
Power describes how quickly work is done. Carrying a bag up stairs in one minute and in five minutes may involve the same work, but the faster climb requires greater average power.
SI unit: watt (W). 1 W = 1 J/s. A unit also used for engines is horsepower: 1 hp = 746 W (as stated in the textbook).
Worked example 7.10: weightlifter
A weightlifter lifts 75 kg through 2 m in 5 s. Taking g = 10 m/s²: work = mgh = 75 × 10 × 2 = 1500 J. Power = 1500/5 = 300 W.
Worked example 7.11: car accelerating
A 1000 kg car starts from rest and reaches 72 km/h = 20 m/s in 10 s. Work = change in kinetic energy = ½ × 1000 × 20² = 200,000 J. Average power = 200,000/10 = 20,000 W.
Power calculator
7.6 🛠️ Simple machines
Simple machines help us do tasks with less effort or more convenience. They do not create energy. The textbook explains ideal machines by ignoring friction and comparing effort and load.
Load: the force/resistance being moved. Effort: the force applied. MA has no unit because it is a ratio.
7.6.1 Pulley
Fixed pulley
Changes the direction of effort. In the ideal fixed pulley, MA = 1; effort equals load.
Movable pulley
Can reduce the effort needed. For the ideal single movable pulley discussed in the lesson, the load is supported by two rope segments, so MA can be 2.
The textbook notes that real machines may require extra effort because of friction. A pulley can make lifting more convenient even when it does not reduce the force.
7.6.2 Inclined plane
An inclined plane is a sloping surface used to raise a load. A longer, gentler ramp can reduce the force needed, although the load moves through a longer distance. In an ideal machine, work input equals useful work output.
Worked example: ramp and mechanical advantage
For an ideal inclined plane, MA can be expressed as length of the slope divided by its vertical height (when the geometry and ideal assumptions in the lesson apply). For example, a 4 m ramp rising 1 m has ideal MA = 4. Real friction reduces the actual advantage.
7.6.3 Lever
A lever is a rigid bar that turns around a pivot called the fulcrum. The applied force is the effort; the object or resistance moved is the load.
Class I lever
Fulcrum between effort and load
Examples: scissors, crowbar, pliers, balance scale, seesaw.
Class II lever
Load between fulcrum and effort
Examples: lemon squeezer, wheelbarrow, bottle opener.
Class III lever
Effort between fulcrum and load
Examples: tongs, tweezers, broom, hammer, oar (as listed in the textbook).
Lever balance: why distance matters
A lever can balance when the turning effects about the fulcrum balance. The textbook uses a seesaw with sliding seats to reason about different weights and distances. A heavier person can balance a lighter person by sitting closer to the fulcrum.
Machines in combination and conservation
Many everyday machines combine two or more simple machines. Ignoring friction, work put in equals useful work done on the load. Machines do not create energy; they help us use it more effectively. Real machines slow down because friction transfers some mechanical energy to thermal energy and sound, so a perpetual-motion machine that produces useful work forever without energy input is not achievable.
- Why is it easier to open a can lid using a spoon as a lever?
- Why move the effort point closer to the scissors’ fulcrum when cutting a hard object?
- Why do real machines eventually slow down and stop?
1. The spoon acts as a lever and helps apply force to the lid. 2. Changing the distance from the fulcrum changes the turning effect; for a hard cut, the shorter effort arm may require greater effort, while the blade action and geometry matter. 3. Friction and resistance transfer mechanical energy into thermal energy and sound; without energy input, motion dies away.
🧪 Textbook activities & “Journey Beyond”
1. Elastic-band launcher
With adult/teacher supervision, use a pen barrel with ends removed, a refill that can slide, a pen cap, rubber band and a safe attachment. Stretch and release the band to observe elastic potential energy changing into kinetic energy. Compare different stretches and note how far the refill travels. Never aim at a person or face.
2. Build a simple machine
Use cardboard, rulers/wooden strips, pencils or bolts as fulcrums, thread/rope, small pulleys or bottle caps, and paper cups for loads. Build a lever, pulley, inclined plane or combination. Measure load and effort, then calculate MA = load/effort.
3. Explore simulations
The textbook suggests PhET simulations: Energy Skate Park, Energy Forms and Changes, Pendulum Lab and Masses and Springs. Vary mass, height and friction and observe energy changes.
Open PhET Interactive Simulations ↗4. The Quest Continues: dark energy
The textbook closes by noting that the Universe’s expansion is accelerating and that scientists have proposed dark energy to explain it. It describes dark energy as mysterious and says scientists study its effects because it may influence the Universe’s long-term fate.
✍️ Revise, Reflect, Refine — textbook exercise
Work through the chapter review in the textbook order. Each item below can be opened for an answer, method or checking hint. For graph-based questions, refer to the original textbook figures 7.37–7.39 because the plotted data points are part of the question.
1. True or False — choose and then reveal the key
- Work is done when a force is applied, even if the object does not move.
- Lifting a bucket vertically upward results in positive work done on the bucket.
- The SI unit for both work and energy is joule (J).
- A motionless stretched rubber band has kinetic energy.
- Energy can change from one form to another.
Key: (i) False; (ii) True; (iii) True; (iv) False — it stores potential energy; (v) True.
2. Fill in the blanks
- Work done = ____ × ____ (in the direction of force).
- 1 joule is done when a force of ____ newton displaces an object by 1 metre in the force direction.
- Kinetic energy of mass m and velocity v = ____.
- Potential energy at a small height h above Earth = ____.
- Power is the ____ at which work is done.
Key: (i) force × displacement; (ii) 1; (iii) ½mv²; (iv) mgh; (v) rate.
3. A ball thrown upwards reaches its highest point. Which statements are correct?
(i) Force acting on the ball is zero. (ii) Acceleration is zero. (iii) Kinetic energy is zero. (iv) Potential energy is maximum.
Correct: (iii) and (iv), assuming the ball continues to be acted on by gravity and air resistance is neglected for the ideal description. At the top, instantaneous speed is zero but gravitational acceleration is not zero.
4. Identify the energy transformation in each situation
Truck moving uphill; unwinding watch spring; photosynthesis in green leaves; water flowing from a dam; burning matchstick; exploding firecracker; speaking into a microphone; glowing electric bulb; solar panel.
- Truck uphill: chemical energy of fuel → kinetic and gravitational potential energy (with heat/sound losses).
- Watch spring: elastic potential → kinetic/mechanical energy.
- Photosynthesis: light → chemical energy.
- Dam water: gravitational potential → kinetic → mechanical/electrical energy.
- Matchstick: chemical → thermal and light energy.
- Firecracker: chemical → light, sound, thermal and kinetic energy.
- Microphone: sound energy → electrical signal.
- Bulb: electrical → light and thermal energy.
- Solar panel: light → electrical energy.
5. Student of mass 50 kg rises 72.5 m; g = 10 m/s². Compare elevator and stairs.
(i) Find the gain in potential energy lifted straight up. (ii) Find the gain when climbing stairs to the same height. (iii) What does this tell you about path dependence?
For either route, ΔU = mgh = 50 × 10 × 72.5 = 36,250 J. The gain in gravitational potential energy depends on the vertical height change, not the path taken.
6. A crane lifts the same mass to the 10th floor, then to the 20th floor in double the time. Compare energy and power.
If floor heights are equal and ground level is the same, reaching the 20th floor means twice the height and therefore twice the gain in gravitational potential energy. If the time is also doubled, average power is unchanged: P = work/time.
7. Raising a flag with a pulley: what affects energy, work and power?
Which factors determine energy required? Does raising slowly or quickly change work? If speed is doubled, what happens to power?
Energy needed to raise it depends on the flag’s mass/weight and vertical height (mgh), plus losses in a real system. Raising it more slowly or quickly does not change ideal work for the same height, but doing the same work in less time increases average power. If the same work is done in half the time, power doubles.
8. Scooter and passengers: compare fuel used to reach the same speed in the same time.
Day 1: rider 60 kg and scooter 100 kg. Day 2: rider 60 kg, son 40 kg and scooter 100 kg. Assume fuel energy alone supplies the energy and there are no losses.
Day 1 total mass = 160 kg; day 2 = 200 kg. At the same speed, kinetic energy is proportional to total mass. Energy/fuel ratio day 1 : day 2 = 160 : 200 = 4 : 5.
9. Balanced seesaw: adult weighs twice as much as child
Draw a figure showing where each sits relative to the fulcrum.
1 unit away—FULCRUM——Child (W)
2 units away
The child sits twice as far from the fulcrum as the adult for balanced turning effects.
10. A 2 kg ball is thrown upwards at 20 m/s; it reaches 19.4 m. Take g = 10 m/s².
(i) Sign of gravity’s work during upward and downward motion. (ii) Work done by air resistance.
(i) Gravity does negative work on upward motion and positive work on downward motion. (ii) Initial kinetic energy = ½ × 2 × 20² = 400 J. Gain in gravitational potential energy at 19.4 m = 2 × 10 × 19.4 = 388 J. At the highest point (as implied by the given height), final kinetic energy is zero; total work by gravity plus air resistance equals −400 J. Gravity’s work = −388 J, so air resistance’s work = −12 J.
11. 10 kg block and variable force–displacement graph (Fig. 7.37)
Initial kinetic energy at 0 m is 180 J. Use the textbook graph from 0 to 4 m to find (i) speed at 0 m, (ii) speed at 4 m, and (iii) whether acceleration is negative in any portion.
(i) 180 = ½ × 10 × v², so v = 6 m/s. (ii) Find work from the area under the given force–displacement graph; final K = 180 J + graph area. Then v = √(2K/m). (iii) Check whether the net force is opposite the motion in any interval; a force in the direction of motion does not give negative acceleration in that interval. Use the exact graph shape and values printed in Fig. 7.37.
12. Moon gravity is one-sixth of Earth gravity. Earth maximum height = 8 m.
For the same initial upward speed, maximum height h = v²/(2g), so height is inversely proportional to g. Moon gravity is g/6, so height is six times 8 m = 48 m.
13. A 1000 kg car brakes; use the speed–time graph in Fig. 7.38.
(i) Describe motion from A to B. (ii) Calculate kinetic energy at A. (iii) Work done by brakes from B to C. (iv) What does kinetic energy transform into?
Read the speeds at A and B from the textbook graph. K at A = ½ × 1000 × (speed at A)². From B to C the car slows to rest, so work by the brakes equals the change in kinetic energy: W = 0 − K at B (negative). Kinetic energy becomes mainly thermal energy in brakes/tyres/road and some sound. The graph supplies the speed values needed for numerical answers.
14. 0.5 kg ball on frictionless track; potential-energy graph Fig. 7.39
At O, speed is 0 m/s and potential energy is 30 J. Calculate speed at P, Q and R from the graph.
Total mechanical energy at O = 30 J. At each labelled point, K = 30 J − U at that point (read U from the graph). Then K = ½mv², so v = √(2K/0.5). Use the exact potential-energy values shown at P, Q and R in Fig. 7.39.
15. A 1.5 kg coconut falls 10 m; g = 10 m/s²; sand’s average resistive force is 3000 N.
(i) Find speed just before impact. (ii) If all the coconut’s energy is used to make the depression, find its depth.
(i) Ignoring air resistance, mgh = ½mv², so v = √(2gh) = √(2 × 10 × 10) = 14.1 m/s approximately. (ii) Energy at impact = mgh = 1.5 × 10 × 10 = 150 J. If 3000 × depth = 150 J, depth = 0.05 m = 5 cm.
Additional quick practice
A force of 12 N moves a box 4 m in its direction. Find work.
Find K for a 4 kg object moving at 3 m/s.
Find U for a 2 kg object at 5 m, using g = 10 m/s².
A machine does 600 J of work in 3 s. Find power.
Load = 150 N; effort = 50 N. Find MA.
🎯 Final self-check quiz
Choose one answer per question and select “Check my score”.
🃏 Flashcards
Click the card to flip between the prompt and answer.
Card 1 of 12